Mindray DC-80A, Руководство оператора

Страница: 345 / 391

System Maintenance 17-5

Cleaning the main panel

Tools: soft dry cloth, soapy water

Method:
Use a soft dry cloth to clean the surface of the control panel (including the keystrokes,
encoders and sliders). If the control panel is dirty, moisten the soft cloth with a little mild soapy
water and wipe away any stains. Use another soft dry cloth to remove any moisture and allow
all hard surfaces to completely air dry. If the control panel is difficult to clean, disassemble the
encoder caps first and then clean it with mild soapy water.
NOTE: The keyboard on the control panel should be cleaned periodically, otherwise the keys
may become blocked with dirt and when the buzzer rings the keys will not work.

Cleaning the cover

Tools: soft dry cloth, soapy water

Method:
Use a soft dry cloth to clean the system's cover. If the system is dirty, moisten the soft cloth
with mild soapy water, wipe away any stains, then air dry.

Clean the dust-proof cover

Tools: soft brush

Method:
a) Disassemble the dustproof cover before cleaning.
System's dustproof cover: use one hand to pull the dust proof clip in the direction of arrow
1 and use the other hand to pull the dust proof cover in the direction of arrow 2 at the
same time.
Probe port dustproof cover: Pull it out.
b) Clean with a soft brush and then wipe away the dust.
c) Assemble the dustproof covers.
Insert the dustproof clasp into the slot on the main unit, push the dustproof clasp inward
until it is fixed in the slot.
Clip
Tab
1
2