Mindray DC-80A, Руководство оператора

Страница: 174 / 391

5-94 Image Optimization
3. According to the help information in the bottom of the screen, if an ROI is displayed, adjust the ROI
size and position. Press <Update> key on the control panel to confirm the ROI.
Tip: When you confirm the ROI size by pressing <Update>, you cannot adjust the ROI size during
acquisition. You can only adjust the ROI position using the trackball.
4. Press the <Save> key on the control panel to start acquisition.
The system displays the Protocol window on the left of the screen, listing the phases for the selected
protocol along with the first phase views (phases are stages). The system selects the first view for
acquisition by default, indicating the selected view by placing a red mark to the right of the view name.
5. Proceed through each view in each stage according to the following instructions:

Non-continuous stages:

To save acquired images for the selected view, press the <Save> key on the control panel. The
system goes to the next view for acquisition by default, saved views are marked with a green
“√.”

Rotate the knob under [Stages XXX] or [Views XXX] to select the stage and view for image
acquisition (or reacquisition). Press the <Save> key to start acquisition.
Tip: Views can be re-acquired until you click [End Acquisition].

If the protocol contains continuous stages (for alternative workflows), then proceed through each
continuous stage according to the following instructions:

To begin saving acquired images for the selected stage, press the <Save> key on the control
panel.
The system displays a percentage marker below the selected stage indicating the progress of the
continuous capture.

To stop saving acquired images for the selected stage, rotate the knob under [Pause] on the
touch screen or press <Freeze> directly. The percentage stops increasing.

Select [Continue] or press the <Freeze> key again to continue.

To end the current acquisition, press <Save> on the control panel.

To select another continuous stage, rotate the knob under [Stage XXX] on the touch screen.

Suspending is not allowed under continuous exam.
When acquisition is complete for each stage, the system advances to the next stage. If the stage is
non-continuous, the system displays the stage views. When image acquisition is completed for all
views and continuous stages, the system switch to Select Mode.
6. To start or restart the timer, click [Stage Timer]/[Exam Timer] on the soft menu to turn it on.
Current
stage/view
Acquired
phase/view
Hints
Saved
loops