Mindray DC-80A, Руководство оператора

Страница: 195 / 391

Display & Cine Review 6-7
2. In live mode or freeze mode, press the user-defined key for iCompare.
3. Select a single-frame image, multi-frame image, or screenshot in the iStation screen (press
<iStation> to enter), Review screen (press <Review> to enter), or thumbnail area in the main
screen.
4. Press the <Dual> key to switch between the left and right windows. Roll the trackball to review
the cine image on the screen one by one.
The window with the highlighted “M” mark is the current activated window.
When the left window is a screenshot, you cannot switch windows.
5. Save the image if it is necessary.
Measurements, adding comments and body marks are allowed.
6. Press <B>, <Single>, or the user-defined key to exit iCompare.
Tips: iCompare can only be performed on B, Color, Power, PW, CW, or M mode for
FRM/CIN/PNG/DCM files.
6.6 Cine Saving

Live capture
Live capture refers to saving the images or cines in image scanning status. After storing them, the
system continues with image scanning.
Live capture can be divided into two types: retrospective and prospective.

Retrospective saving saves specified images which were captured before the current
moment. Images stored in the cine memory are saved to the system's hard drive.

Prospective saving saves specified images which are captured later than the current
moment. Images are saved to both the cine memory and the system's hard drive.
The live capture time can be set.

In imaging mode, tap [Pro Capture] / [Retro Capture] ont the touch screen or press the
user-defined key for “Save Cine (Prospective)/(Retrospective)” on the control panel.
Tip:

Press the save key again or <Freeze> to stop saving.

When saving is complete, a thumbnail displays in the Thumbnail area.

Frozen image storage
In frozen mode, tap [Pro Capture] / [Retro Capture] ont the touch screen or press the user-defined
key for “Save Cine (Prospective)/(Retrospective)” on the control panel.
After the cine is successfully saved, a thumbnail is displayed on the screen.
The live capture time can be set.
6.7 Setting Cine Length

Live capture:

Prospective Cine Length
Prospective cine duration: set the time that the user taps [Pro Capture] as the start time.
The system proceeds saving the cine.
Procedures:
With the ECG disabled: tap [Cine] tab, and rotate [Time (Pro)] knob to adjust it.
With the ECG enabled: tap [Cine] tab. Tap [Loop Type (Pro)] to choose the type of the
saving time and the cardiac cycles. Rotate [Time (Pro)] or [Cycle (Pro)] to adjust it.

Retrospective Cine Length: