Mindray DC-80A, Руководство оператора

Страница: 82 / 391

5-2 Image Optimization
4. Probes that can be switched to: select an appropriate probe for quick switch.
5. Recently used exam modes: select an appropriate exam mode for quick switch.

Parameter magnitude setting: touch or to increase/decrease the value.

ON/OFF setting: some of the parameters can only be set to ON or OFF. ON activates the
function, and when the function is activated the key is highlighted in green.

Page selection: if there is more than 1 page for the current mode, touch
to turn the pages.

Functional item: touch to go to the corresponding function.
6. Knob-adjusting area: displays the knob-controlled parameters.
There are five knobs at the bottom of the touch screen. Their functions vary depending on the
current menu. Press or rotate the knobs to adjust the corresponding parameters.

Adjust using the touch screen (mapping mode)
1. Enter the mapping mode to see the following mapping menu. See “3.8.4 Touch Screen Operation”
for details.
2. Touch the item on the touch screen to operate:
a) Menu title: displays current imaging mode. Touch the expanding button to show all available
imaging modes under the current status, Touch to enter the modes.
b) Current available special mode entrance: displays the available imaging modes related, touch to
enter the modes. For example: iWorks, Physio.
c) Parameter adjusting area: displays the parameters in the current imaging mode or function.

Value adjustment: touch the parameter to adjust the value. To increase the value by flipping
from left to right and decrease the value by flipping from right to left.
Expanding button
Sub-menu
Menu title
Menu item
Special mode
entrance