Mindray DC-80A, Руководство оператора

Страница: 19 / 391

Safety Precautions 1-7
8. It is necessary to press <End Exam> to end the current scan that is
in progress and clear the current Patient Information field. Failure to
do so may result in new patient data being combined with the
previous patient's data.
9. Do not connect or disconnect the system’s power cord or its
accessories (e.g., a printer or a recorder) without turning the system
power OFF first. This may damage the system and its accessories or
cause electric shock.
10. If the system is improperly powered off during operation, it may
result in damage to the data on the system hard drive or system
failure.
11. Do not use a USB memory device (e.g., a USB flash drive, or a
removable hard disk) which contains unsafe data. This may result in
system damage.
12. It is recommended to only use the video devices specified in this
manual.
13. Do not use gel, disinfectant, probes, probe sheath or needle-guided
brackets that are not compatible with the system.
14. The applied contrast agents should be compliant with the relevant
local regulations.
15. Read the Acoustic Output Principle in the operation manual carefully
before operating this system in clinical examinations.
16. The cover contains natural rubber that can cause allergic reactions
in some individuals.
17. Use ultrasound gel which complies with the relevant local
regulations.
18. Normal operation may be affected by an unstable mains power
supply. It is recommended that the product be powered from an
uninterruptible power supply.
19. DO NOT expose the system to excessive vibration through
transportation. Mechanical damage may result.
20. Always keep the system dry. Avoid transporting this system quickly
from a cold place to a warm place; otherwise condensation or water
droplets may form allowing a short circuit and possible electric
shock.
NOTE: 1. DO NOT use the system in the vicinity of strong electromagnetic fields (such as
transformers), which may affect the performance of the system.
2. Do not use the system in the vicinity of high-frequency radiation sources (e.g.,
cellular phones), which may affect the performance of the system or even lead to
failure.
3. When using or positioning the system, keep the system level to avoid instability.