Mart Cyclone 30 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 62 / 322

2 - 14 Installation, Operations, and Maintenance Manual
The MART Corporation Standard Turntable Power Washer v. 4.0
5. Services and Connections
Begin services and connections only after you have leveled and anchored the washer.
5.1. Introduction
You are now ready to connect the utilities to the washer, and install options. To do this,
use your utilities connection plan, devised during placement planning. (Refer to section
"Prerequisites, Placement Planning" at the beginning of this chapter.)
Your plan and the SBO tell you which of the following utility connections and options'
installations you must make. Use this manual to locate the connections on the power
washer.
WARNING! Be sure that the people who install the power
washer and make connections are qualified and trained for
the task. They should meet all licensing standards required in
your area.
Utility connection procedures are divided into two major parts:
·
Input
·
Output
These are discussed in the sections that follow.
After you have connected utilities, install any options you may have purchased from
MART.