
3 - 2
Installation, Operations, and Maintenance Manual
The MART Corporation
Standard Turntable Power Washer v. 4.0
CAUTION! WHEN LOADING AND UNLOADING PARTS! --
Always wear gauntlet-type thermally protected and water-
repellent protective gloves, protective eyewear, a filter-type air
mask, and a full body apron that is thermally protected and
water-repellent.
CAUTION! WHEN LOADING AND UNLOADING PARTS! -- After
a cleaning cycle, parts are very hot. Trace amounts of
chemical residue remain on part surfaces and in recesses.
Before you remove a part from the washer cabinet, be sure to
drain back into the washer any solution that remains on a part
surface or in recesses.
What You Will Learn In This Chapter
In this chapter you will learn the following about operating the washer:
·
Control panel
·
Standard cleaning cycle
·
Checking water temperature
·
Using the clock-override switch
·
Opening the Door
·
Loading and Securing Parts
·
Closing and locking the Door
·
Verifying Wash Temperature
·
Setting the Timer
·
Setting the Rinse Cycle (optional)
·
Starting the Washer
·
Verifying Proper Function
·
Opening the Door after a Cycle
·
Unloading Parts
·
Continuous operation
Содержание Cyclone 30 Series
