Mart Cyclone 30 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 210 / 322

Options 7 - 31
Standard Turntable Power Washer v.
4
.0 The MART Corporation
4.5. Troubleshooting
This section contains tables on the following problems:
·
Peristaltic pump does not pump
·
Concentration cannot be maintained
Problem: Peristaltic pump does not pump
Check This: Probable Cause(s)
Pump tubing Cracked (move or replace)
Barrel Empty of concentrate (replace)
Power Not ON
Fuses Not intact (remove and measure continuity)
Overloads Not all of them are re-set
Probe Dirty (clean)
Set point Too high (set below readout level)
Pump motor Defective (replace)
Fig. 7 - 13: Troubleshooting: Peristaltic Pump Does Not Pump
Problem: Conductivity cannot be maintained
Check This: Probable Cause(s)
Peristaltic pump tubing Cracked (move or replace)
Barrel Empty of concentrate (replace)
Conductivity controller Set point incorrectly set
Defective
Chemical Concentration:
Wrong type of chemical
Wrong concentration recommended or developed
Concentration not proportional to conductivity
Fig. 7 - 14: Troubleshooting: Conductivity Cannot Be Maintained