Mart Cyclone 30 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 121 / 322

Advanced Operations: Process-Control 4 - 9
Standard Turntable Power Washer v. 4.0 The MART Corporation
concentration the carbon steel components are well protected and will provide years of
service. Carbon steel MART power Washers are still in service that are 20+ years old.
Many chemicals provide adequate corrosion prevention at low concentrations,
but some do not. Generally, to prevent corrosion in carbon steel the pH of the
solution must be above 10.5.
MART Power Washers are aqueous based cleaning systems. They are designed and
manufactured to work with wash solutions that have the same the specific gravity and
viscosity as water. Chemicals or additives, which alter the specific gravity or viscosity of
the wash solution, will change the overall performance of the system. Use only MART
Power Kleen chemicals or other chemicals that are designed for use in aqueous
systems.
Below is a short introduction to the complete chemical line offered by the MART
Corporation Chemical Group.
1.8 MART Chemical Group
MART Power Kleen detergents and additives are specially formulated for use in all
MART Power Washers. Power Kleen products cover a wide range of applications and
most likely there is a Power Kleen product specifically designed for your particular
cleaning applications. In all cases Power Kleen products provide the highest degree of
efficient, effective cleaning.
Power Kleen products are highly effective at controlling foaming and are labeled
"Controlled Foam" products. Additional defoamer products are available to help in
difficult foaming situations.
Power Kleen products remain effective longer than many other detergents used in
cabinet washer applications and, in many instances, less Power Kleen detergent is
required for a given application. Power Kleen chemicals have 100% concentrated active
ingredients. The reason MART compounds remain active longer is that they contain NO
fillers. Other chemical suppliers may "fill" or bulk up their chemistries with non-active
ingredients that do nothing except fill up the chemical drum. These fillers end up as
sludge in the bottom of the Power Washer and must be disposed of, thus adding to the
disposal costs. Since MART Power Kleen is fully active chemistry 100% of the chemical
goes to work cleaning your parts. As a result, your cleaning dollar goes further and your
disposal costs are less.
1.9 Recommended Chemicals
Power Kleen I – Iron and Steel
Fast acting, long lasting Power Washer detergent for removing heavy oils and grease,
many types of carbon, and other deposits from all ferrous metals.
Power Kleen II – Aluminum Safe