Mart Cyclone 30 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 186 / 322

Options 7 - 7
Standard Turntable Power Washer v.
4
.0 The MART Corporation
1.4. Maintenance
Every 8 hours of operation:
·
Check the grease reservoir fill-level. Refill as required, according to
the grease pump/reservoir manufacturer's instructions.
· Check the Auto-lube control panel for a fault indication. If the fault
indicator is
ON , your Auto-lube system is not providing grease to the
bearings. Discontinue washer operations until the problem is
corrected. Refer to section
Troubleshooting .
NOTE: Use Lubriplate 1444 grease ONLY.
Every 160 hours of operation:
·
Check the filter/regulator/lubricator unit. The lubricator has an oil
reservoir, and is located on the right side of the washer. Add oil, if
required, to the fill-level.
Refer to your vendor-supplied cutsheet for instructions.
NOTE: If the system runs out of grease, you will have to prime
the system.