Mart Cyclone 30 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 211 / 322

7 - 32 Installation, Operations, and Maintenance Manual
The MART Corporation Standard Turntable Power Washer v.
4
.0
5. Internal Reservoir Cover
The internal reservoir cover provides the following benefits:
·
Safety: Provides a barrier covering the wash solution reservoir. This isolates the
operator from accidental contact with the hot wash solution as might occur if
someone was to slip and fall.
· Catch: Catches small parts that may loosen during the cleaning cycle and fall from
the turntable. The floor prevents the parts from falling into the solution and being
lost in the reservoir.
·
Insulation: Provides a thermal insulation cover over the reservoir tank. This slows
down the heat loss from the reservoir (saves energy) especially when the cabinet
door is open.
5.1. Theory of Operation
The internal reservoir cover is steel-sheet-supported by angles welded to the cabinet
walls above the wash solution reservoir and below the turntable. It funnels all liquid
back through an expanded-metal screen area to the reservoir.
The internal reservoir cover is removable for sludge clean out and other maintenance
procedures. It is held in place by thumbscrews, which are easily removed and replaced.
5.2. Installation
If you purchase the optional internal reservoir cover, your power washer is delivered with
the internal reservoir cover factory-installed and ready to use.
5.3. Operations
There are no operational procedures for the internal reservoir cover.
WARNING! Do NOT OVERLOAD the internal reservoir cover
or other horizontal surfaces. The internal reservoir cover is
intended as a chemical-solution cover ONLY! Horizontal
surfaces are NOT designed for walking or standing! Walking
on the internal reservoir cover, tank cover, or other horizontal
surfaces could result in serious injury or death.