Mart Cyclone 30 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 306 / 322

- 10 -
MART PUMP 20-70HP
PARTS LIST
A. PARTS ORDERING. When ordering parts please provide the following information.
1. Serial number of pump (located on nameplate). Size of pump (2 X 3 X 10 or 4 x 5 x 11)
2. Part description (located on parts listin the following pages).
3. Part number (located on parts list).
4. Quantity of parts needed.
For replacement parts contact:
MART Tech Services Toll-free: 800-543-6278
2450 Adie Road Suite 100 Switchboard: 314-567-3705
Maryland Heights, MO, 63043 Fax: 314-567-6318
www.marttechservices.com Email: themart@martwash.com (ATTN: SERVICE)
If motor or motor parts are required, please specify name of manufacturer, HP and frame size from
motor nameplate.
B. PARTS DESCRIPTION & DRAWINGS. To determine the proper drawing to reference, first
determine if you have a simplex pump (single wash pump) or a duplex pump (suction pump feeding
main wash pump). Next determine which pump frame type is on your pump. There are two frames
for MART pumping systems, 12V or 1530.
Use one of the ways below to determine which pump frame type you have:
1.
Count the bolt holes on the upper pump frame bearing cap- item G1: 12V has 4 holes, 1530
has 8 Holes
2. Read the serial number from the steel tag on the pump. All pumps with serial numbers above
100,000 are 1530 frame. These are the newer model and were produced starting in 1994. All
pumps with serial numbers less than 50,000 are 12 V frame. If your pump serial number is
below 100,000 and above 50,000 you can determine which frame you have by (a) Calling
MART Tech Services (b) Counting the bolt holes in item #1 above
3. Measure the center to center distance between the upper and lower bearings on the pump
shaft. The 1530 frame-bearing center to center distance is 6”. The 12V frame-bearing center to
center distance is 5”.
4. Measure the opening on the bearing frame below the lower bearing.
5. Look at the bearing frame photographs below choose the proper pump type.
Please verify frame type with us when ordering.
PUMP BEARING FRAME TYPES