Mart Cyclone 30 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 142 / 322

5 - 6 Installation, Operations, and Maintenance Manual
The MART Corporation Standard Turntable Power Washer v. 4.0
Fig. 5 - 3: Lubrication Chart
2.1.3. PBM Nozzles (Inspect/Monitor)
Inspect the PBM wash-and-rinse nozzles for clogging and alignment. The flat-spray
nozzles are aligned with "punch" marks on the manifold to ensure an overall uniform
coverage, which gives you the best cleaning results. When you check for clogging, be
sure to check that all nozzles are correctly aligned, as indicated in the following figure.
Monitor the amperage draw at the main wash pump(s) to check for worn nozzles: A
higher amperage draw than normal (check your baseline readings) indicates that
nozzles may need to be replaced. Remember that a worn nozzle is not always visually
apparent -- nozzle tips can look fine, but actually be quite worn. Since a worn tip can
spray at up to 30% over capacity, amperage draw will be higher.