Mart Cyclone 30 Series, Инструкция по установке, эксплуатации и обслуживанию, Страница: 134 / 322

4 - 22 Installation, Operations, and Maintenance Manual
The MART Corporation Standard Turntable Power Washer v. 4.0
Many factors affect optimal run-time for the ASE cycle. For example:
·
Operating temperature of the power washer
·
Atmospheric pressure
·
Feet above sea level at the installation site
To test for the most effective ASE cycle , follow this procedure :
1. Start by setting the ASE timer to 5 minutes.
2. Run the ASE cycle.
3. Check to see if any steam remains in the cabinet after the ASE cycle has
completed.
4. Increase or decrease the ASE timer by one-minute increments. (Generally, if
steam remains in the cabinet, increase the timer by one minute.)
5. Repeat steps #2 - #4 until the cabinet is purged of steam.
WARNING! When you run this test, do not open the washer
cabinet door until the automatic steam exhaust (ASE) cycle
has completed. Steam can contain chemical used in the wash
cycle. Refer to your chemical supplier's warnings about the
chemical you use.
NOTE : When the start button light goes out, the ASE cycle has
finished.