Magnum Energy ME-ARTR, Руководство пользователя

Страница: 32 / 182

Setup
©
2017 Sensata Technologies
Page 23
3.3.4 SETUP Button and Menus
Pressing the SETUP button provides access to the menu items and settings that enable you to
con fi gure the router display, the inverter/charger, a ME-AGS-N, and a ME-BMK. Review each
menu item to determine if you need to adjust any settings to meet your system requirements.
Info: The fi rst screen that may appear when the SETUP button is pushed is a password
screen. If the PIN has been set under the TECH button’s 06 SETUP PIN menu, the fi rst
screen is the Set SETUP PIN menu. The proper PIN must now be entered in order to
access the SETUP menus. After fi ve minutes from the last button push, the display
automatically returns to the System Home screen and the PIN must be reentered in
order to access the SETUP menus. Refer to the TECH button’s SETUP PIN menu to set
or change the PIN number.
Press
SETUP
Rotate to desired selection:
Press to
select
Top line shows menu
Bottom line shows menu
(Ex: Inverter Setup menu)
01 System Setup
02 Inverter Setup
03 Charger Setup
ALL Select SETUP
02B Low Battery Cut
Out (LBCO) Volts =
20.0 Volts
ALL View INV SETUP
01 System Setup 05 BMK Setup
02 Inverter Setup 06 RC Setup
03 Charger Setup 07 PT Setup
04 AGS Setup
Figure 3-11, SETUP Button
SETUP: 01 System Setup
The following menus are used to set up the router clock and screen.
• 01A System Clock/Date: The router’s real time clock must be set for proper operation of
some features—such as: the SETUP button’s 02C AC In – Time , 04B Gen Run Time , 04G Gen
Quiet Time , 04H Gen Exercise menus , and the TECH button’s 05 Fault History menu items.
**IMPORTANT**
It is very important that you set the time clock and date as they are a critical piece in knowing
when fault issues occur, viewing PT data history, as well as for the proper start/stop functions
of your AGS device, if installed.
Info: If the router is disconnected from the inverter, the clock and date settings will
need to be reset.
To Set the Current Time (HH:MM AM or PM)
From the Set System Clock menu:
1. Rotate the SELECT knob to the hour of day, and then press SELECT.
2. Rotate the SELECT knob to the correct minute setting, and then press SELECT.
3. Rotate the SELECT knob to the appropriate AM or PM setting, and then press SELECT.
To Set the Current Date (MM/DD/YY)
From the Set Current Date menu:
1. Rotate the SELECT knob to the current month, and then press SELECT.
2. Rotate the SELECT knob to the current day, and then press SELECT.
3. Rotate the SELECT knob to the current year, and then press SELECT.
• 01B Screen Setup: This setting adjusts the contrast and brightness of the LCD screen to
accommodate the current lighting conditions and viewing angle.
Default settings: Contrast = 50% , Brightness = 50%
Range: 0-100%