Maeda CC1908S-1, Руководство по эксплуатации

Страница: 251 / 326

M A E D A Crawler Crane 6.17 PERIODIC MAINTENANCE
5/2020 CC1908S-1 6-43
• Check that the battery relay is turned to "OFF"
and the main power current is not turned on.
After turning the starter switch to the "OFF"
position, wait approximately one minute, then
press the horn switch. If the horn does not
sound, no power is provided.
• Apply chocks to prevent the crawler tracks from
moving.
WORK WITH AT LEAST TWO PERSONS
DURING MAINTENANCE WITH ENGINE
RUNNING
To prevent accidents, do not attempt maintenance
when the engine is running.
Always adhere to the following if maintenance
with the engine running is unavoidable:
• One person must sit in the operator's seat ready
to stop the engine at any time while maintaining
communication with the other workers.
• Set the lock lever (1) to the "LOCK" (L) position.
• When working near rotating parts such as fans,
belts, and winch drums, keep your body and
any object that could become caught away from
these parts.
• Never allow any object or tool to fall on or get
stuck in the rotating parts of fans, belts, and
winch drums. There is a danger of objects flying
out if they hit rotating parts.
• Do not touch the control levers or pedals. If the
control levers or pedals have to be moved for
some reason, always signal to nearby persons
that they should retreat to a safe place.
USE APPROPRIATE TOOLS
Use appropriate tools in the appropriate manner.
Using damaged or deformed tools or using tools
for any purpose other than their intended
application may result in serious personal injury.
PRECAUTIONS FOR WORKING AT HIGH
ELEVATION
Secure scaffolding by using a work platform with
steps when working at high elevation.
PRECAUTIONS WHEN WORKING ON
MACHINE
• Keep footings tidy during maintenance on the
machine to avoid falling, and always observe
the following precautions:
Do not spill oil or grease.
Do not leave tools scattered around.
Be careful of footings when walking.
Remove dirt, oil, and grease from the soles of
shoes.
• Never jump off the machine. Use a platform and
handrails, and secure your body in three
locations (both feet and one hand, or both
hands and one foot) when climbing up or down
the machine.