Maeda CC1908S-1, Руководство по эксплуатации

Страница: 23 / 326

M A E D A Crawler Crane 2.1 BASIC PRECAUTIONS
5/2020 CC1908S-1 2-5
Do not leave the area when refuelling or
replenishing the oil.
Close and securely tighten the fuel tank and
hydraulic oil tank caps.
Do not spill fuel on hot surfaces or electrical
systems.
After refuelling, wipe away any spilt fuel or oil.
Oily rags and any other combustible
materials must be placed in a safe container
and stored in a safe place.
Use non-combustible cleaning oil for cleaning
components, and do not use diesel fuel,
petrol, or anything else that may catch fire.
Do not weld or use gas cutting equipment on
pipes or tubes containing flammable liquids.
Store fuel and oil in a designated
well-ventilated location and prevent
unauthorized access.
Move flammable materials to a safe place
before using grinding or welding tools on the
machine.
• Fire due to accumulation of combustible
materials
Remove any build-up of combustible
materials, (such as dead leaves, chips, litter,
or charcoal dust) from around the engine
exhaust manifold, exhaust pipe, battery, or
underside covers.
To prevent fire caused by sparks from
bonfires or other types of fire, remove any
build-up of combustible materials (such as
dead leaves, chips, litter, or charcoal dust)
from around the cooling units (radiator and oil
cooler).
• Fire from electrical cables
Fire may occur due to short-circuiting of
electrical systems. The following points must be
strictly observed:
Keep all electrical wiring connections clean,
and make sure they are securely in place.
Inspect electrical wiring for looseness and
damage on a daily basis. Retighten any loose
connectors or wiring clamps, and repair or
replace any damaged electric wiring.
• Fire from pipes
Check that all hose and tube clamps and
cushions are securely tightened. If they are
loose, they may vibrate or rub against other
parts while the machine is being operated,
damaging hoses and causing high-pressure oil
to spurt out, resulting in fire or personal injury.
• Explosion triggered by lighting fixtures
When inspecting fuel, oil, battery fluid, and
cooling water, use lighting equipment
designed with explosion-proof specifications.
When power from the machine is drawn to
power lighting equipment, adhere to the
instructions in this operation manual.
2.1.4 PRECAUTIONS WHEN
GETTING ON AND OFF THE
MACHINE
USE THE HANDRAILS AND STEPS WHEN
GETTING ON AND OFF THE MACHINE.
When getting on and off the machine, be sure to
observe the following precautions to prevent
accidents such as slipping and falling or tumbling:
• Use the handrails and steps marked by arrows
in the figure on the right when getting on and off
the machine.
• When getting on and off the machine, always
face the machine and make sure your body is
supported by the handrails and steps at least
three points (either both feet and one hand or
one foot and both hands).