manualshive.com logo in svg

Maeda CC1908S-1, Руководство по эксплуатации

Поделиться
Скачать
Maeda CC1908S-1 Скачать руководство пользователя страница 182

5.9  FLY JIB (OPTION)

 

M A E D A 

Crawler Crane 

5-66 

5/2020 CC1908S-1 

 

1.

  Remove the plug (D) from the connector 

(31) on the boom side. 

 

2.

  Disconnect the connector (A) from the 

connector (32) on the fly jib side, and 
disconnect the connector (B) from the 
connector (33) on the boom side. 

3.

  Connect the connector (A) to the 

connector (33) on the boom side, and 
connect the connector (B) to the 
connector (31) on the boom side. 

 

4.

  Connect the plug (C) to the connector 

(32) on the fly jib side. 

 

The harness will be temporarily 
electrically disconnected until 
reconnection is complete. 
A fly jib error will be displayed here, but 
this is not a fault. 

24. 

Reconnect the hydraulic hoses on the right 
side of the main boom tip and on the right 
side of the fly jib base using the following 
procedure: 

 WARNING 

Be sure to check that the engine has been 
shut down before starting work. 

 
 
 
 
 
 
 
 
 

IMPORTANT 

•   Be sure to reconnect the hydraulic hoses. 

The fly jib cannot be operated unless the 
hydraulic hoses are reconnected.  

•  Check that the hydraulic hose couplers are 

securely inserted after reconnecting.

 

 

1.

  Remove the caps from the couplers (51) 

and (52) on the boom side. 

 

2.

  Disconnect the hydraulic hose (A) from 

the coupler (53) on the fly jib side, and 
disconnect the hydraulic hose (B) from 
the coupler (54) on the fly jib side. 

3.

  Wash the couplers to remove any dust. 

4.

  Connect the hydraulic hose (A) to the 

coupler (52) on the boom side, and 
connect the hydraulic hose (B) to the 
coupler (51) on the boom side. 

 

5.

  Attach caps to the couplers (53) and 

(54) on the fly jib side. 

 

 

 

 

Содержание CC1908S-1







































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды