LS ELECTRIC LSLV-H100 Series, Руководство пользователя

Страница: 265 / 618

252
Learning Advanced Features
Easy Start On Setting Details
Use caution when turning on the inverter after Easy Start On configuration. If codes such as PRT-08
(Reset Restart), COM-96 (PowerOn Resume), or CON-71 (SpeedSearch) are configured in Easy
Start On, the inverter may start operating as soon as it is powered on.
5.41 Config (CNF) Mode
Code Description
CNF-61
Easy
Start On
Follow the procedures listed below to set the easy start on parameters.
No Procedures
1 Set CNF-61 (Easy Start On) to
‘1(Yes)’.
2 Select
‘
1 (All Grp)
’ in CNF-40
(Parameter Init) to initialize all parameters
3 Restarting the inverter will activate Easy Start On. Set the values in the
following screens on the Keypad. To escape from Easy Start On, press the
[ESC] key.
•
Start Easy Set:
Select ‘Yes’.
•
CNF-43: Select a macro.
•
BAS-10 60/50 Hz Sel: Set motor rated frequency.
•
DRV-14 Motor Capacity: Set motor capacity.
•
BAS-13 Rated Curr: Set motor rated current.
•
BAS-15 Rated Volt: Set motor rated voltage.
•
BAS-11 Pole Number: Set motor pole number.
•
BAS-19 AC Input Volt: Set input voltage.
•
PRT-08 Select start at trip reset
•
PRT-09 Retry Number: Sets the number of restart trial when
performing a trip reset.
•
COM-96 PowerOn Resume: Sets the serial communication
restart function.
•
CON-71 SpeedSearch: Set SpeedSearch.
•
DRV-06 Cmd Source: Set command source.
•
DRV-07 Freq Ref Src: Set Frequency Reference source.
•
AP3-01 Now Date : Set the current date.
•
AP3-02 Now Time : Set the current time.
When the settings are complete, the minimum parameter settings on the
motor have been made. The Keypad will return to a monitoring display.
Now the motor can be operated with the command source set at DRV-06.