LS ELECTRIC LSLV-H100 Series, Руководство пользователя

Страница: 195 / 618

182
Learning Advanced Features
EPID Basic Operation Setting Details
Code Description
EPI-01 EPID1 Mode
Sets the EPID1 modes.
Setting Function
0 None EPID1 is not used.
1 Always On EPID1 operates at all times.
2 During Run Operates only when the inverter is running.
3 DI
Dependent Operates when terminal input (EPID1 Run)
is on.
EPI-02 PID Output
Displays the existing output value for the EPID controller. The unit,
gain, and scale that were set in the EPID group are applied on the
display.
EPI-03 EPID Ref Value
Displays the existing reference value set for the EPID controller.
The unit, gain, and scale that were set in the EPID group are
applied on the display.
EPI-04 EPID1 Fdb
Value
Displays the existing feedback value set for the EPID controller.
The unit, gain, and scale that were set in the EPID group are
applied on the display.
EPI-05 EPID1 Err
Value
Displays the difference between the existing reference and the
feedback (error value). The unit, gain, and scale that were set in the
PID group are applied on the display.
EPI1-06 EPID1 Ref Src
Selects the reference input for the EPID control. If the V1 terminal is
set to an EPID1 feedback source (EPID1 F/B Source), V1 cannot
be set as the EPID1 reference source (EPID1 Ref Source). To set
V1 as a reference source, change the feedback source.
Setting Function
0 Keypad Keypad
1 V1 -10-10 V input voltage terminal
3 V2 I2 analog input terminal [When analog
voltage/current input terminal selection switch
(SW2) at the terminal block is set to I
(current), input 0-20 mA current. If it is set to V
(voltage), input 0
–10 V]
4 I2
5 Int. 485 RS-485 input terminal
7 FieldBus Communication command via a
communication option card
8 Pulse TI Pulse input terminal (0-32 kHz Pulse input)
EPI-07 EPID1 Ref Set
Set the EPI control reference type (EPI-
06) to ‘0 (Keypad)’ to enter
the reference value.