LS ELECTRIC LSLV-H100 Series, Руководство пользователя

Страница: 149 / 618

136
Learning Basic Features
4.18.3 Frequency Jump
Use frequency jump to avoid mechanical resonance frequencies. The inverter will avoid
identified ranges during acceleration and deceleration. Operation frequencies cannot be set
within the pre-set frequency jump band.
When a frequency setting is increased, while the frequency parameter setting value
(voltage, current, RS-485 communication, keypad setting, etc.) is within a jump frequency
band the frequency will be maintained at the lower limit value of the frequency band. Then,
the frequency will increase when the frequency parameter setting exceeds the range of
frequencies used by the frequency jump band.
Group Code Name LCD Display
Parameter
Setting
Setting Range Unit
ADV
27 Frequency jump Jump Freq 0 0
–1
0
–1
-
28
Jump frequency
lower limit1
Jump Lo 1 10.00
0.00
–Jump frequency
upper limit 1
Hz
29
Jump frequency
upper limit1
Jump Hi 1 15.00
Jump frequency lower
limit 1
–Maximum
frequency
Hz
30
Jump frequency
lower limit 2
Jump Lo 2 20.00
0.00
–Jump frequency
upper limit 2
Hz
31
Jump frequency
upper limit 2
Jump Hi 2 25.00
Jump frequency lower
limit 2
–Maximum
frequency
Hz
32
Jump frequency
lower limit 3
Jump Lo 3 30.00
0.00
–Jump frequency
upper limit 3
Hz
33
Jump frequency
upper limit 3
Jump Hi 3 35.00
Jump frequency lower
limit 3
–Maximum
frequency
Hz