LEGRAND 1U, Руководство пользователя

Страница: 400 / 543

Janu
ary 201
9
400 Legrand PDU User Guide

<hy_value> is a numeric value that is assigned to the hysteresis for the specified inlet pole sensor. See
"To De-assert" and Deassertion Hysteresis
(on page 513).

<as_value> is a number in samples that is assigned to the assertion timeout for the specified inlet pole
sensor. See
"To Assert" and Assertion Timeout
(on page 511).

Additional sensors supported by Legrand PDUs:
The CLI command(s) listed above can be also applied to the following sensors. Note that the measurement
unit of current values in CLI is
A
, not mA.
Sensor type Description
peakCurrent Peak current sensor
reactivePower Reactive power sensor
displacementPowerFa
ctor Displacement power factor sensor
phaseAngle Inlet phase angle sensor
Commands for Overcurrent Protector Sensors
A sensor configuration command for overcurrent protectors begins with
sensor ocp
.
You can configure various overcurrent protector threshold settings at a time by combining multiple
commands. See
Multi-Command Syntax
(on page 408).

Set the Upper Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperCritical <option>

Set the Upper Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> upperWarning <option>

Set the Lower Critical threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerCritical <option>

Set the Lower Warning threshold for an overcurrent protector:
config:# sensor ocp <n> <sensor type> lowerWarning <option>

Set the deassertion hysteresis for an overcurrent protector:
config:# sensor ocp <n> <sensor type> hysteresis <hy_value>

Set the assertion timeout for an overcurrent protector: