Janu
ary 201
9
Legrand PDU User Guide 145
: Turn OFF.
2. Confirm the operation on the confirmation message. An actuator's state is marked in red when it is
turned on.
Note: Per default you can turn on as many dry contact actuators as you want, but only one "powered dry
contact" actuator can be turned on at the same time. To change this limitation of "powered dry contact"
actuators, modify the active powered dry contact setting. See
Peripherals
(on page 130).
Other operations:
You can go to another sensor's or actuator's data/setup page by clicking the selector
on the top-left
corner.
Z Coordinate Format
Z coordinates refer to vertical locations of Raritan's environmental sensor packages. You can use either the
number of rack units or a descriptive text to describe Z coordinates.
For a Z coordinate example, see
Sensor/Actuator Location Example
(on page 145).
To configure Z coordinates:
1. Determine the Z coordinate format on
PDU
(on page 102). Available Z coordinate formats include:
Format
Description
Rack Units
The height of the Z coordinate is measured in
standard rack units.
When this is selected, you can type a numeric
value in the rack unit to describe the Z coordinate
of any environmental sensors or actuators.
Free-Form
Any alphanumeric string can be used for
specifying the Z coordinate. The value comprises
0 to 24 characters.
2. Configure Z coordinates on the
Individual Sensor/Actuator Pages
(on page 141).
Содержание 1U
Страница 1: ...Legrand PDU User Guide Xerus Firmware v3 5 0 ...
Страница 2: ...Copyright 2019 Legrand Inc LG 0B v3 5 0 E January 2019 255 80 0054 00 ...
Страница 53: ...January 2019 Legrand PDU User Guide 53 ...
Страница 77: ...January 2019 Legrand PDU User Guide 77 4 Press to show the Network Cascading page ...