Janu
ary 201
9
368 Legrand PDU User Guide
Powering On/Off/Cycle Outlet Groups
This section applies to outlet-switching capable models only.
Power on one outlet group:
#
power outletgroup <ID> on
Power off one outlet group:
#
power outletgroup <ID> off
Power cycle one outlet group:
#
power outletgroup <ID> cycle
To quicken the operation, you can add the parameter "/y" to the end of the command, which confirms the
operation.
For example:
#
power outletgroup <ID> off /y
If you entered the command without "/y", a message appears, prompting you to confirm the operation. Then:
Type
y
to confirm the operation, OR
Type
n
to abort the operation
Variables:
<ID> is an outlet group's index number.
Inlet Configuration Commands
An inlet configuration command begins with
inlet
. You can configure an inlet by using the inlet configuration
command.
Changing the Inlet Name
This command syntax names an inlet.
config:#
inlet <n> name "<name>"
Variables:
<n> is the number of the inlet that you want to configure. For a single-inlet PDU, <n> is always 1. The
value is an integer between 1 and 50.
<name> is a string comprising up to 64 ASCII printable characters. The <name> variable must be
enclosed in quotes when it contains spaces.
Содержание 1U
Страница 1: ...Legrand PDU User Guide Xerus Firmware v3 5 0 ...
Страница 2: ...Copyright 2019 Legrand Inc LG 0B v3 5 0 E January 2019 255 80 0054 00 ...
Страница 53: ...January 2019 Legrand PDU User Guide 53 ...
Страница 77: ...January 2019 Legrand PDU User Guide 77 4 Press to show the Network Cascading page ...