Janu
ary 201
9
364 Legrand PDU User Guide
config:#
security ipAccessControl ipv4 enabled true defaultPolicyIn accept
defaultPolicyOut accept
Results:
The IPv4 access control feature is enabled.
The default policy for inbound traffic is set to "accept."
The default policy for outbound traffic is set to "accept."
Example 2 - Adding an IPv4 Firewall Rule
The following command adds a new IPv4 access control rule and specifies its location in the list.
config:#
security ipAccessControl ipv4 rule add 192.168.84.123/24 accept
insertAbove 5
Results:
A new IPv4 firewall control rule is added to accept all packets sent from the IPv4 address
192.168.84.123.
The newly-added rule is inserted above the 5th rule. That is, the new rule becomes the 5th rule, and the
original 5th rule becomes the 6th rule.
Example 3 - User Blocking
The following command sets up two user blocking parameters.
config:#
security userBlocking maximumNumberOfFailedLogins 5 blockTime 30
Results:
The maximum number of failed logins is set to 5.
The user blocking time is set to 30 minutes.
Example 4 - Adding an IPv4 Role-based Access Control Rule
The following command creates a newIPv4 role-based access control rule and specifies its location in the
list.
config:#
security roleBasedAccessControl ipv4 rule add 192.168.78.50 192.168.90.100
admin deny insertAbove 3
Results:
A new IPv4 role-based access control rule is added, dropping all packets from any IPv4 address
between 192.168.78.50 and 192.168.90.100 when the user is a member of the role "admin."
The newly-added IPv4 rule is inserted above the 3rd rule. That is, the new rule becomes the 3rd rule,
and the original 3rd rule becomes the 4th rule.
Содержание 1U
Страница 1: ...Legrand PDU User Guide Xerus Firmware v3 5 0 ...
Страница 2: ...Copyright 2019 Legrand Inc LG 0B v3 5 0 E January 2019 255 80 0054 00 ...
Страница 53: ...January 2019 Legrand PDU User Guide 53 ...
Страница 77: ...January 2019 Legrand PDU User Guide 77 4 Press to show the Network Cascading page ...