LEGRAND 1U, Руководство пользователя

Страница: 232 / 543

Janu
ary 201
9
232 Legrand PDU User Guide
Placeholder Definition
[RADIUSERRORDESC] A Radius error occurred
[ROMCODE] The rom code of an attached peripheral device
[SENSORREADING] The value of a sensor reading
[SENSORREADINGUNIT] The unit of a sensor reading
[SENSORREPORT] The formatted sensor report contents
[SENSORSTATENAME] The human readable state of a sensor
[SENSORTHRESHOLDNAME] The name of the threshold being crossed
[SENSORTHRESHOLDVALUE] The value of the threshold being crossed
[SERVERPOWEROPERATION] The power control operation that was initiated on a
server (on/off)
[SERVERPOWERRESULT] The result of a power control operation
[SMARTCARDID] The id of a smart card
[SMARTCARDTYPE] The type of a smart card
[SMTPRECIPIENTS] The list of recipients, an SMTP message was sent to
[SMTPSERVER] The name or IP address of an SMTP server
[SYSCONTACT] SysContact as configured for SNMP
[SYSLOCATION] SysLocation as configured for SNMP
[SYSNAME] SysName as configured for SNMP
[TIMEREVENTID] The id of a timer event
[TIMESTAMP]
The timestamp of the event occurrence
[UMTARGETROLE] The name of a user management role, an action was
applied on
[UMTARGETUSER] The user, an action was triggered for
[USERIP] The IP address, a user connected from
[USERNAME] The user who triggered an action
[VERSION] The firmware version the device is upgrading to
Note: In case you need to type any square brackets "[" and "]" in the custom message for non-placeholder
words, always add a backslash in front of the square bracket. That is, \[ or \]. Otherwise, the message sent
will not display the square brackets.
Editing or Deleting a Rule/Action
You can change the settings of an event rule, action or scheduled action, or delete them.
Exception: Some settings of the built-in event rules or actions are not user-configurable. Besides, you cannot
delete built-in rules and actions. See
Built-in Rules and Rule Configuration (on page 200) or Available
Actions (on page 211).

To edit or delete an event rule, action or scheduled action:
1. Choose Device Settings > Event Rules.
2. Click the desired one in the list of rules, actions or scheduled actions. Its setup page opens.