LEGRAND 1U, Руководство пользователя

Страница: 411 / 543

Janu
ary 201
9
Legrand PDU User Guide 411
Enabling or Disabling Load Shedding
This section applies to outlet-switching capable models only.
This command determines whether to enter or exit from the load shedding mode.
# loadshedding <option>
After performing the above command, Legrand PDU prompts you to confirm the operation. Press
y
to
confirm or
n
to abort the operation.
To skip the confirmation step, you can add the "/y" parameter to the end of the command so that the
operation is executed immediately.
# loadshedding <option> /y
Variables:

<option> is one of the options:
enable
or
disable
.
Option Description
start Enter the load shedding mode.
stop Quit the load shedding mode.
Example
The following command has the Legrand PDU enter the load shedding mode.
config:# loadshedding start
Power Control Operations
This section applies to outlet-switching capable models only.
Outlets on the Legrand PDU can be turned on or off or power cycled through the CLI.
Besides, you can cancel the power-on process while the Legrand PDU is powering on ALL outlets.
You must perform this operation in the
administrator mode
. See
Different CLI Modes and Prompts
(on
page 296).