Janu
ary 201
9
Legrand PDU User Guide 131
If wanted, you can resort the list by clicking the desired column header. See
Sorting a List
(on page 94).
Sensor/actuator overview on this page:
If any sensor enters an alarmed state, it is highlighted in yellow or red. See
Yellow- or Red-Highlighted
Sensors
(on page 135). An actuator is never highlighted.
Column
Description
Name
By default the Legrand PDU assigns a name
comprising the following two elements to a
newly-managed sensor/actuator.
Sensor/actuator type, such as "Temperature" or
"Dry Contact."
Sequential number of the same sensor/actuator
type, like 1, 2, 3 and so on.
You can customize the name. See
Individual
Sensor/Actuator Pages
(on page 141).
Reading
Only managed 'numeric' sensors show this data,
such as temperature and humidity sensors.
State
The data is available for all sensors and actuators.
See
Sensor/Actuator States
(on page 136).
Type
Sensor or actuator type.
Serial Number This is the serial number printed on the sensor
package's label. It helps to identify your Raritan
sensors/actuators. See
Finding the Sensor's
Serial Number
(on page 137).
Position
The data indicates where this sensor or actuator is
located in the sensor chain.
See
Identifying the Sensor Position and Channel
(on page 138).
Actuator
Indicates whether this sensor package is an
actuator or not. If yes, the symbol
is shown.
To release or manage sensors/actuators:
When the total of managed sensors/actuators reaches the maximum value (32), you cannot manage
additional ones. The only way to manage any sensor/actuator is to release or replace the managed ones. To
replace a managed sensor/actuator, see
Managing One Sensor or Actuator
(on page 139). To release any
one, follow this procedure.
1. Click
to make checkboxes appear in front of sensors/actuators.
Tip: To perform the desired action on only one sensor/actuator, simply click that sensor/actuator without
making the checkboxes appear.
2. Select multiple sensors/actuators.
To release sensors/actuators, you must select "managed" ones only. See
Sensor/Actuator States
(on page 136).
To manage sensors/actuators, you must select "unmanaged" ones only.
Содержание 1U
Страница 1: ...Legrand PDU User Guide Xerus Firmware v3 5 0 ...
Страница 2: ...Copyright 2019 Legrand Inc LG 0B v3 5 0 E January 2019 255 80 0054 00 ...
Страница 53: ...January 2019 Legrand PDU User Guide 53 ...
Страница 77: ...January 2019 Legrand PDU User Guide 77 4 Press to show the Network Cascading page ...