LEGRAND 1U, Руководство пользователя

Страница: 72 / 543

Janu
ary 201
9
72 Legrand PDU User Guide
Note: The submenu is not available when the front panel outlet control is disabled. If so, a message
"Front-panel outlet control is disabled" is displayed.
4. Press or to select the desired option, and press .
 Switch On: Turn on the outlet group.
 Switch Off: Turn off the outlet group.
 Cycle: Power cycle the outlet group.
5. A confirmation message appears. Press or to select Yes or No, and then press .
 Yes: Confirm the operation.
 No: Abort the operation.
6. Verify that the selected outlet group is switched on or off, depending on the option you selected in the
above step.
 Check the outlet group state shown on the LCD display -- red or green circles.
 Check each member outlet's LED of the group. A green LED indicates that the outlet is turned off,
and a red LED indicates that the outlet is turned on.
7. To return to the Main Menu, press several times until the Main Menu is shown.
Peripherals
If there are no Raritan environmental sensor packages connected to your Legrand PDU, the LCD display
shows the message "No managed devices" for the "Peripherals" menu command.
If you have enabled the front panel actuator control function, you can switch on or off a connected actuator
using the LCD display. See
Miscellaneous
(on page 252).

To show environmental sensor or actuator information:
1. Press or to select "Peripherals" in the Main Menu, and press .
2. The display shows a list of environmental sensors/actuators.
 If the desired sensor or actuator is not visible, press or to scroll up or down.
 When the list exceeds one page, the currently-selected sensor/actuator's ID number and total of
managed sensors/actuators are indicated in the top-right corner of the display.
 If any sensor enters the warning, critical, or alarmed state, like 'Tamper Detector 1' shown below, it is
highlighted in yellow or red. For color definitions, see
Yellow- or Red-Highlighted Sensors
(on
page 135).