LEGRAND 1U, Руководство пользователя

Страница: 330 / 543

Janu
ary 201
9
330 Legrand PDU User Guide
Interface Description
wireless Determine the IPv6 preferred host name of the
WIRELESS interface (that is, wireless
networking).
bridge Determine the IPv6 preferred host name of the
BRIDGE interface (that is, bridging mode).

<name> is a host name which:

Consists of alphanumeric characters and/or hyphens
 Cannot begin or end with a hyphen
 Cannot contain more than 63 characters

Cannot contain punctuation marks, spaces, and other symbols
Setting the IPv6 Address
After selecting the static IP configuration mode, you can use this command to assign a permanent IP
address to the Legrand PDU.
config:# network ipv6 interface <ETH> address <ip
address>
Variables:

<ETH> is one of the network interfaces:
ETH1/ETH2
,
WIRELESS
, or
BRIDGE
. Note that you must
choose/configure the bridge interface if your Legrand PDU is set to the bridging mode.
Note: In the bridging mode, only the IP parameters of the BRIDGE interface function. The IP parameters
of ETH1/ETH2 and WIRELESS interfaces do NOT function.
Interface Description
eth1 Determine the IPv6 address of the ETH1 interface
(wired networking).
eth2 Determine the IPv6 address of the ETH2 interface
(wired networking).
wireless Determine the IPv6 address of the WIRELESS
interface (that is, wireless networking).
bridge Determine the IPv6 address of the BRIDGE
interface (that is, the bridging mode).

<ip address> is the IP address being assigned to your Legrand PDU. This value uses the IPv6 address
format. Note that you must add
/xx
, which indicates a prefix length of bits such as /64, to the end of this
IPv6 address.
Setting the IPv6 Gateway
After selecting the static IP configuration mode, you can use this command to specify the gateway.
config:# network ipv6 gateway <ip address>
Variables:

<ip address> is the IP address of the gateway. This value uses the IPv6 address format.