LEGRAND 1U, Руководство пользователя

Страница: 348 / 543

Janu
ary 201
9
348 Legrand PDU User Guide
Setting the Automatic Daylight Savings Time
This command determines whether the daylight savings time is applied to the time settings.
config:# time autoDST <option>
Variables:

<option> is one of the options:
enable
or
disable
.
Mode Description
enable Daylight savings time is enabled.
disable Daylight savings time is disabled.
Examples
This section illustrates several time configuration examples.
Example 1 - Time Setup Method
The following command sets the date and time settings by using the NTP servers.
config:# time method ntp
Example 2 - Primary NTP Server
The following command sets the primary time server to 192.168.80.66.
config:# time ntp firstServer 192.168.80.66
Checking the Accessibility of NTP Servers
This command verifies the accessibility of NTP servers specified manually on your Legrand PDU and then
shows the result. For instructions on specifying NTP servers via CLI, see
Setting NTP Parameters
(on page
345).
To perform this command successfully, you must:

Own the "Change Date/Time Settings" permission.

Customize NTP servers. See
Setting NTP Parameters
(on page 345).
This command is available either in the administrator/user mode or in the configuration mode. See
Different
CLI Modes and Prompts
(on page 296).

In the administrator/user mode:
# check ntp

In the configuration mode:
config# check ntp
Security Configuration Commands
A security configuration command begins with
security
.