LEGRAND 1U, Руководство пользователя

Страница: 24 / 543

This chapter explains how to install your Legrand PDU and configure it for network connectivity.
In This Chapter
Connecting the PDU to a Power Source ................................................ 24
Connecting the Legrand PDU to Your Network...................................... 24
Configuring the Legrand PDU ................................................................ 26
Bulk Configuration Methods ................................................................... 32
Cascading Multiple Legrand PDUs for Sharing Ethernet Connectivity .. 33
Connecting the PDU to a Power Source
1. Verify that all circuit breakers on the Legrand PDU are set to ON. If not, turn them ON.
Or make sure that all fuses are inserted and seated properly. If there are any fuse covers, ensure that
they are closed.
Note: Not all models have overcurrent protectors.
2. Connect each Legrand PDU to an appropriately rated branch circuit. See the label or nameplate affixed
to your Legrand PDU for appropriate input ratings or range of ratings.
Note: When a Legrand PDU powers up, it proceeds with the power-on self test and software loading for
a few moments.
3. When the software has completed loading, the outlet LEDs show a steady color and the front panel
display illuminates. Note that outlet LEDs are only available on some PDU models.
Connecting the Legrand PDU to Your Network
To remotely administer the Legrand PDU, you must connect the Legrand PDU to your local area network
(LAN). Legrand PDU can be connected to a wired or wireless network.
Note: If your Legrand PDU will work as a master device in the bridging mode, you must make a wired
connection. See
Cascading Multiple Legrand PDUs for Sharing Ethernet Connectivity (on page 33).
Ethernet port of Legrand PDU must be enabled for the described connection to work properly, which has
been enabled per default. See
Wired Network Settings
(on page 156).

To make a wired connection:
1. Connect a standard network patch cable to either or both Ethernet ports on the Legrand PDU.
 The two Ethernet ports must be connected to different subnets. See
Dual Ethernet Connection
(on
page 26).
2. Connect the other end of the cable to your LAN.
Initial Installation and
Configuration