LEGRAND 1U, Руководство пользователя

Страница: 404 / 543

Janu
ary 201
9
404 Legrand PDU User Guide
Actuator Configuration Commands
An actuator configuration command begins with
actuator
. You can configure the name and location
parameters of an individual actuator.
You can configure various parameters for one actuator at a time. See
Multi-Command Syntax
(on page
408).

Change the name:
config:# actuator <n> name "<name>"

Set the X coordinate:
config:# actuator <n> xlabel "<coordinate>"

Set the Y coordinate:
config:# actuator <n> ylabel "<coordinate>"

Set the Z coordinate:
config:# actuator <n> zlabel "<z_label>"

Modify the actuator's description:
config:# actuator <n> description "<description>"
Variables:

<n> is the ID number assigned to the actuator. The ID number can be found using the Legrand PDU web
interface or CLI. It is an integer starting at 1.

<name> is a string comprising up to 64 ASCII printable characters. The <name> variable must be
enclosed in quotes when it contains spaces.

<coordinate> is a string comprising up to 24 ASCII printable characters, and it must be enclosed in
quotes.

There are two types of values for the <z_label> variable, depending on the Z coordinate format you set:
Type Description
Free form <coordinate> is a string comprising up to 24
ASCII printable characters, and it must be
enclosed in quotes.
Rack units <coordinate> is an integer number in rack units.
Note: To specify the Z coordinate using the rack units, see Setting the Z Coordinate Format for
Environmental Sensors (on page 323).

<description> is a sentence or paragraph comprising up to 64 ASCII printable characters, and it must be
enclosed in quotes.
Example - Actuator Naming
The following command assigns the name "Door lock" to the actuator whose ID number is 9.
config:# actuator 9 name "Door lock"