LEGRAND 1U, Руководство пользователя

Страница: 363 / 543

Janu
ary 201
9
Legrand PDU User Guide 363
config:# security roleBasedAccessControl ipv6 rule delete <rule_number>
Variables:

<rule_number> is the number of the existing rule that you want to remove.
Enabling or Disabling Front Panel Outlet Switching
This section applies to outlet-switching capable models only.
The following CLI commands control whether you can turn on or off an outlet by operating the front panel
display.

To enable the front panel outlet control feature:
config:# security frontPanelPermissions add switchOutlet

To disable the front panel outlet control feature:
config:# security frontPanelPermissions remove switchOutlet
Enabling or Disabling Front Panel Actuator Control
The following CLI commands control whether you can turn on or off a connected actuator by operating the
front panel LCD display.

To enable the front panel actuator control feature:
config:# security frontPanelPermissions add switchActuator

To disable the front panel actuator control feature:
config:# security frontPanelPermissions remove switchActuator
Tip: If your PDU supports multiple front panel permissions, you can combine them into one command by
adding a semicolon (;) between different permissions. For example, the following CLI command enables both
front panel actuator control and outlet switching functions simultaneously.
security frontPanelPermissions add switchActuator;switchOutlet
Examples
This section illustrates several security configuration examples.
Example 1 - IPv4 Firewall Control Configuration
The following command sets up two parameters of the IPv4 access control feature.