LEGRAND 1U, Руководство пользователя

Страница: 437 / 543

Janu
ary 201
9
Legrand PDU User Guide 437

Additional configuration keys set via the
config.txt
file will be applied after performing the bulk restore
operation.

This option CANNOT be used with the option "full_config_restore."

If a firmware upgrade will be performed at the same time, you must generate the bulk configuration file
based on the NEW firmware version instead of the current firmware version.

full_config_restore

Specify the name of the full configuration backup file used to restore the Legrand PDU.
Note: See Backup and Restore of Device Settings (on page 266) for instructions on generating the full
configuration backup file.

Additional configuration keys set via the
config.txt
file will be applied after performing the configuration
restore operation.

This option CANNOT be used with the option "bulk_config_restore."

If a firmware upgrade will be performed at the same time, you must generate the full configuration
backup file based on the NEW firmware version instead of the current firmware version.

collect_diag

If this option is set to
true
, the diagnostic data of the Legrand PDU is transmitted to the USB drive.

The filename of the diagnostic data written into the USB drive is:
diag_<unit-serial>.zip

The Legrand PDU device beeps after it finishes writing the diagnostic data to the USB drive.

switch_outlets

This feature works on outlet-switching capable models only.

Switch on or off specific outlets.

The option's value comprises outlet numbers and the setting "on" or "off" as explained below:
 Each "on" or "off" setting consists of three parts: outlet numbers, a colon, and the word "on" or "off".
 Each "on" or "off" setting is separated with a semicolon.
 If all outlets will share the same "on" or "off" setting, replace the outlet numbers with the word "all".

Examples:

Turn on outlets 1 to 3, and 10, and turn off outlets 4 to 9.
switch_outlets=1,2,3:on;4-9:off;10:on
 Turn on all outlets.
switch_outlets=all:on

tls_cert_file

Specify the filename of the wanted TLS server certificate. The filename can contain a single placeholder
${SERIAL} that is replaced with the serial number of the Legrand PDU.

This option should be used with
tls_key_file
listed below.

This option is NOT supported by bulk configuration or backup/restore via DHCP/TFTP.

tls_key_file

Specify the filename of the wanted TLS server key. The filename can contain a single placeholder
${SERIAL} that is replaced with the serial number of the Legrand PDU.

This option should be used with
tls_cert_file
listed above.

This option is NOT supported by bulk configuration or backup/restore via DHCP/TFTP.

execute_lua_script

Specify a Lua script file. For example:
execute_lua_script=my_script.lua