Konica Minolta DRYPRO793, Руководство по установке

Страница: 62 / 202

Ch.2 Unpacking and Installation
< 58 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
5
Remove the 2 cables on the far side of the
HPRO unit from their clamps.
6
Loosen the 4 screws (Sems
2
M4X8) at the
front and rear of the upper cover (HPRO unit).
Upper Cover
Front
The screws securing
the HPRO unit cover
are designed so that
they cannot be removed
even when loosened.
7
As shown at left, remove the upper cover
holding the left and right sides.
8
Set the removed upper cover top side down in a
safe place.
Because the heat roller
removed in step-15 will
be rested on the
removed upper cover,
make sure that the
cover is placed in a
safe location where
there is no risk of it
falling or being
accidentally bumped.
9
Remove the 2 screws (TP screws M4X8)
securing the upper opposing rack (one at the
front, one at the back).