Konica Minolta DRYPRO793, Руководство по установке

Страница: 32 / 202

Ch.1 Pre-installation Information
< 28 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
1.4.5 Interior
Be careful not to touch
the deodorant filter
housing (yellow) when
pulling out the
deodorant filter case.
The housing carries
temperatures in excess
of 100
:
and may
cause burns if touched.
1) Lever-A (Green)
Locks the deodorant filter case.
2) Lever-B (Green)
Used when opening the left cover.
3) Lever-C (Green)
Used when opening the right cover.
4) Cover-B
When a film jam occurs between the
descent transport unit and the
justification unit, this cover may be
opened to feed the jammed film to the
descent transport unit.
5) Cover-C
When a film jam occurs between the
justification unit and the elevator
transport unit, this cover may be opened
to feed the jammed film to the elevator
transport unit.
6) Deodorant Filter
Removes odours generated during heat
processing. This filter must be changed
regularly.
7) Deodorant Filter Case
Contains the deodorant filter. To change
the deodorant filter, open the deodorant
filter case cover. When a film jam
occurs between the HPRO and the film
discharge units, the deodorant filter
case may also be removed to remove
the jammed film.
7) Deodorant Filter Case
6) Deodorant Filter
1) Lever-A
Housing (Yellow)
2) Lever-B 3) Lever-C 4) Cover-B 5) Cover-C
Levers and knobs in the
DRYPRO 793 are
painted in different
colors depending on
the purpose of use.
Blue : For
maintenance
and inspection
Green : For removal of
jam films.