Konica Minolta DRYPRO793, Руководство по установке

Страница: 52 / 202

Ch.2 Unpacking and Installation
< 48 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
15
Remove the one screw (TP screw M4X8) and
remove the protection hardware securing the
pickup unit.
14
Slide left and right Accuride rails into the main
body.
Sliding Accuride rails out to their fullest extent engages a lock rendering it
impossible to slide the rails back into the unit. The lock may be disengaged using a
finger (1) and then slid back into the unit (2).
(1)
(2)
Lock ON Lock OFF
When holding the pickup unit, do not hold the guide plate that can be easily
deformed.Care should be taken so that the actuator of the passing sensor does not
fall off.
Set the pickup unit down with the side on which components are installed facing
up.
Actuator Guide Plate