Konica Minolta DRYPRO793, Руководство по установке

Страница: 90 / 202

Ch.3 Setup
< 86 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
3.1 Outline of DRYPRO 793 Settings
[TRAY SETUP]
- FILM SETUP : Settings include size and type of film loaded in DRYPRO
793 and tray usage status.
[SERVICE 1]
- SCP SETUP : Setting of DICOM information for DRYPRO 793 itself.
- SCU SETUP : Registration of diagnostic devices connected to DRYPRO
793 and setting of diagnostic device DICOM information.
- SYSTEM SETUP : Settings related to internal operation of DRYPRO 793.
- NEW USER : Registration of users utilizing the DRYPRO 793 main body
and Web maintenance tools.
(Only when the user log in mode is ON.)
[PRINT SETUP]
- PRINT CONDITION : Setting of print conditions for each diagnostic device
connected to DRYPRO 793 (image parameters, etc.).
- LUT SETUP : Editing of DRYPRO 793 internal user LUTs.
(Refer to "Outline of LUT Settings.")
[TIMER SETUP]
- TIME SET : Check and setting of the DRYPRO 793 internal clock and
setting of the time and date display format.
- MAINTENANCE SCHEDULE : Initialization of the regular DRYPRO793 inspection
schedule.
[OTHER SETUP]
- SORTER SETUP : DRYPRO 793 sorter usage status, bin destination
settings, etc.
p.165 Web
Maintenance
Mode
The user registration setting is made only when the user log in mode is ON.
User log in ON/OFF settings are made from [SYSTEM SETUP] under [SERVICE 1].
DRYPRO 793 settings may also be made from the Web maintenance tool. For
details, refer to "Chapter 6: Web Maintenance Mode."
3.1.1 Settings to be Made during Installation
The following network and printing settings are made using the maintenance mode.
An outline of the maintenance mode is set out below.
p.93 SCP SETUP
p.96 SCU SETUP
p.102 SYSTEM SETUP
p.105 NEW USER
p.110 PRINT
CONDITION
p.118 LUT SETUP
p.88 FILM SETUP
p.124 TIME SET
p.128 MAINTENANCE
SCHEDULE
p.131 SORTER
SETUP