Konica Minolta DRYPRO793, Руководство по установке

Страница: 16 / 202

Ch.1 Pre-installation Information
< 12 >
DRYPRO Vstage MODEL 793 Installation Manual Ver.1.00 2004.11
1.2.2 Expanded Port Specification
Conditions
The expanded port specification includes 5ch in addition to 15ch of the basic specification,
producing a total of 20ch.
The expanded channel configuration enables connection of a maximum of five additional
external devices to 1ch of the basic specification. The following conditions apply to the
external devices connected to the expanded port.
1. No. of Expanded ch : 5ch
2. Devices that may be connected : KDIS devices (RS Series, IS Series, Liteview)
REGIUS Series (backup settings only)
3. No. of sheets to be processed : Devices with maximum daily print count of 20
sheets.
4. Setting Restrictions : Unlike the basic specification, channel-specific LUT
settings or print condition settings cannot be made
for external devices connected to the expanded
5ch.
The LUT setting is fixed at linear and the print
condition settings are common to the expanded
5ch.
5. Preparations : Before making expanded port settings, the Konica
Minolta sales department should be contacted for
details of system drawings.
Settings
In normal SCU settings, the "expanded port no." + "AE Title" setting is essential: with
DRYPRO 793, however, additional channels may be allocated to a 1ch expanded port without
AE title. (The port to which the additional channels are to be allocated is determined under
[SERVICE 1] - [SCP SETUP].
Use of the expanded port enables connection of a maximum of 20ch.
The expanded port and AE title of the external devices connected are set in the blank column.