Katronic Technologies FLUXUS ADM 6725, Инструкция по эксплуатации

Страница: 100 / 148

10 - 2
ADM 6725 E10

KA T
Virtual Calculation Channels
10.3 Parameterisation of the Calculation
Channels
Parameter |
For channel Y:
After selecting a calculation channel in program branch
>PARAMETER< ...
Calculation:
Y= A - B
... FLUXUS firstly displays the actual calculation settings.
If required, it is possible to alter this by pressing any
key.
>CH1<funct ch2 |
A - B
>CH1<funct ch2 |
|A| - B
Ch1>FUNCT<ch2 |
|A| (+)/2 |B|
>
CH1
<: Select the first physical input channel.
>
CH2
<: Select the second physical input
channel.
>
FUNCT
< Select the calculation preferred.
The calculation function operates always sign-marked. Thus,
you can select either the sign-marked measuring value of an
input channel (A) or the absolute amount of the measuring
value (|A|) in each case >CH1< and >CH2<.
All physical channels of the flowmeter are ready to be
selected.
The following calculations can be set up:
−
difference
Y:= CH1 - CH2
+ sum
Y:= CH1 + CH2
(+)/2 mean
Y:=
CH1 CH2
2
+
10.4 Program Branch Output Options for a
Calculation Channel
Output Options |
For Channel Y:
After selecting a calculation channel in program branch
>OUTPUT OPTIONS< ...
Meas.Quantity
Volume Flow
Volume in:
m3/h
... FLUXUS firstly displays the same setting possibilities as for
a physical channel (quantity of measurement, unit of
measurement).
Take care that the selected option here matches that
of the two input channels.