Katronic Technologies FLUXUS ADM 6725, Инструкция по эксплуатации

Страница: 92 / 148

8 - 6
ADM 6725 E10

KA T
Measuring Data Transfer to PC
(2) Instrument information and the parameter record for the first measuring data set will
follow next. We define a measuring data set as data which comprise the parameters
and the measured values of a complete measuring run, i.e. from the start of a
measurement to the end. There is also information given, since the collection of data
started.
::::::::::::::::::::::::::::::
\DEVICE : ADM6515-01500363 Instrument type/serial number
\MODE : ONLINE ONLINE or STORED measured values
\NAME : SCANDATA Only with multi-channel measurement
\CHAN : 2 (A:B:) Only with multi-channel measurement: indicates
available channels
\START : 05.07.96/09:32:54 Start of measurement
The parameter record follows and if your instrument is equipped with the capacity to
work in multi-channel mode, the parameter record for each channel will be given.
The following example shows the maximum possible amount of information that the
parameter record can contain (OFFLINE generated with program parameter /XT+).
Para.Record :
Meas. Point No. : : A:- A: appears only with multi-channel unit
Pipe :
Outer Diameter : 70,0 mm
Wall Thickness : 2,5 mm
Roughness : 0,0 mm
Pipe Material : Stainless Steel
c-Material : 3230,0 m/s Only if ‘Other Material’ selected
Lining : NO LINING
c-Material : m/s Only if pipe lining exists
Liner Thickness : mm
Medium : Water
c-Medium MIN: 1400,0 m/s Medium parameters appear only
c-Medium MAX: 1550,0 m/s if ‘Other Medium’ selected
kin. Viscosity : 1,01 mm2/s
Density : 1,00 g/cm3
Medium Temperat.: 25 C
Transducer Type : Q2N-494 Serial number of transducer set
Transd. Data 1: 35,8 Transducer parameters ... appear only if
Transd. Data 2: 2550,0 ‘Other transducer’ selected
Transd. Data 3: 2550,0
Transd. Data 4: 5,5
Transd. Data 5: 14,5
Transd. Data 6: 110
Sound Path : Reflex or ‘x NUM SUPERUSER’
Transd. Distance : 24 mm
Damping : 3 s
Corr.Offset :T1:------ C Offset value of temperature T1
Corr.Offset : ?:------ C
Full-scale value : 30,00 m3/h Full scale value for process interfaces
Current Loop : 0/20 mA If current loop activated
Pulse Value : 0,01 m3 If pulse output activated
Pulse Width : 30 ms If pulse output activated
Storage Rate : 00:00:10 SAMPLES ‘SAMPLES’/’AVERAGE’: Storage mode
Meas. Quantity : Volume Flow
Unit of Measure. : [m3/h] Q:[Wh] ‘Q:[Wh]’ if heat quantity not in Joules