Juniper J4350, Руководство по началу работы

Страница: 150 / 284

J4350 and J6350 Services Router Getting Started Guide
Action
From the CLI, enter the
show system autoinstallation status
command.
Sample Output
user@host> show system autoinstallation status
Autoinstallation status:
Master state: Active
Last committed file: None
Configuration server of last committed file: 10.25.100.1
Interface:
Name: ge-0/0/0
State: Configuration Acquisition
Acquired:
Address: 192.168.124.75
Hostname: host-ge-000
Hostname source: DNS
Configuration filename: router-ge-000.conf
Configuration filename server: 10.25.100.3
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
Interface:
Name: ge-0/0/1
State: None
Address acquisition:
Protocol: DHCP Client
Acquired address: None
Protocol: RARP Client
Acquired address: None
What It Means
The output shows the parameters configured for autoinstallation. Verify that the
values displayed are correct for the Services Router when it is deployed on the
destination network.
130
Verifying Autoinstallation