Juniper J4350, Руководство по началу работы

Страница: 132 / 284

J4350 and J6350 Services Router Getting Started Guide
Table 37: Configuring Basic Settings (continued)
Task J-Web Configuration Editor CLI Configuration Editor
Define the IP address for lo0.0 .
1.
In the configuration editor
hierarchy, next to Interfaces, click
Configure or Edit .
2. In the Interface table, locate the lo0
row and click Unit .
3. In the Unit table, click 0 , and in the
Family section next to Inet, click
Configure or Edit .
4.
To delete the existing IP address,
click the Discard button. Select the
Delete Configuration Below This
Point
option button from the next
display.
5.
Next to Address, click Add new
entry .
6. In the Source box, type the
address and prefix length for the
loopback interface—for example,
172.16.1.24/32 .
7. Click OK .
1.
From the [edit] hierarchy level,
enter
edit interfaces
2. Delete the existing IP address:
delete lo0 unit 0 family inet
address
3.
Set the IP address and prefix length
of lo0.0 . For example:
set lo0 unit 0 family inet address
172.16.1.24/32
Define the IP address for ge-0/0/0 .
1.
In the configuration editor
hierarchy, next to Interfaces, click
Configure or Edit .
2.
In the Interface table, locate the
ge-0/0/0 row and click Unit .
3. In the Unit table, click 0 , and in the
Family section next to Inet, click
Configure or Edit .
4. To delete the existing IP address,
click the Discard button. Select the
Delete Configuration Below This
Point
option button from the next
display.
5.
Next to Address, click Add new
entry .
6.
In the Source box, type the
address and prefix length for
the management interface—for
example,
192.168.1.1/24 .
7. Click OK .
1.
Delete the existing IP address:
delete ge-0/0/0 unit 0 family inet
address
.
2. Set the IP address and prefix length
of ge-0/0/0 . For example:
set ge-0/0/0 unit 0 family inet
address 192.168.1.1/24
112
Configuring Basic Settings with a Configuration Editor