Juniper J4350, Руководство по началу работы

Страница: 135 / 284

Chapter 8
Configuring Secure Web Access
You can manage a Services Router remotely through the J-Web interface. To
communicate with the Services Router, the J-Web interface uses Hypertext Transfer
Protocol (HTTP). HTTP allows easy Web access but no encryption. The data that
is transmitted between the Web browser and the router by means of HTTP is
vulnerable to interception and attack. To enable secure Web access, a Services
Router supports Hypertext Transfer Protocol over Secure Sockets Layer (HTTPS).
You can enable HTTP or HTTPS access on specific interfaces and ports as needed.
You can use J-Web Quick Configuration, the J-Web configuration editor, or the CLI
configuration editor to configure secure Web access.
This chapter contains the following topics. For more information about the J-Web
interface, see the
J-Web Interface User Guide .
Secure Web Access Terms on page 115
Secure Web Access Overview on page 116
Before You Begin on page 117
Configuring Secure Web Access with Quick Configuration on page 117
Configuring Secure Web Access with a Configuration Editor on page 121
Verifying Secure Web Access on page 122
Secure Web Access Terms
Before configuring secure Web access, become familiar with the
terms defined in Table 38.
Table 38: Secure Web Access Terms
Term Definition
certificate authority (CA) Third-party organization or company that issues digital certificates used to create
digital signatures and public-private key pairs. The CA guarantees the identity of the
individual or device that presents the digital certificate.
Hypertext Transfer
Protocol (HTTP) Protocol used to publish and receive information on the Web, such as text and
graphics files.
Secure Web Access Terms
115