Juniper J4350, Руководство по началу работы

Страница: 82 / 284

J4350 and J6350 Services Router Getting Started Guide
To configure the Services Router or to modify an existing configuration, you
add statements to the configuration with the
edit
and
set
configuration mode
commands. For more information about the CLI configuration editor and
configuration mode, see the
J-series Services Router Basic LAN and WAN Access
Configuration Guide and the JUNOS software configuration guides.
CLI Basics
This section contains the following topics:
Editing Keystrokes on page 62
Command Completion on page 63
Online Help on page 63
Configuring the CLI Environment on page 65
Editing Keystrokes
In the CLI, you use keystrokes to move around on and edit the command line,
and to scroll through a list of recently executed commands. Table 27 lists some
typical CLI editing tasks and the keystrokes that perform them.
Table 27: CLI Editing Keystrokes
Task Category Action Keyboard Sequence
Move the cursor back one character. Ctrl-b
Move the cursor back one word. Esc b
Move the cursor forward one character. Ctrl-f
Move the cursor forward one word. Esc f
Move the cursor.
Move the cursor to the end of the command line. Ctrl-e
Delete the character before the cursor. Ctrl-h, Delete, or Backspace
Delete the character at the cursor. Ctrl-d
Delete all characters from the cursor to the end of
the command line. Ctrl-k
Delete all characters on the command line. Ctrl-u or Ctrl-x
Delete the word before the cursor. Ctrl-w or Esc Backspace
Delete characters.
Delete the word after the cursor. Esc d
Insert recently deleted text. Insert the most recently deleted text at the cursor. Ctrl-y
Redraw the screen. Redraw the current line. Ctrl-l
62
Using the Command-Line Interface