manualshive.com logo in svg

Juniper Internet Router M160, Руководство по оборудованию

Juniper Internet Router M160 - эффективное решение для вашей сети. Получите подробное руководство по обслуживанию и настройке оборудования в "Hardware Manual" бесплатно. Скачайте его на manualshive.com уже сегодня, чтобы убедиться в безупречной работе вашего маршрутизатора.

Поделиться
Скачать
background image

End User License Agreement

READ THIS END USER LICENSE AGREEMENT ("AGREEMENT") BEFORE DOWNLOADING, INSTALLING, OR USING THE SOFTWARE. BY DOWNLOADING,
INSTALLING, OR USING THE SOFTWARE OR OTHERWISE EXPRESSING YOUR AGREEMENT TO THE TERMS CONTAINED HEREIN, YOU (AS CUSTOMER
OR IF YOU ARE NOT THE CUSTOMER, AS A REPRESENTATIVE/AGENT AUTHORIZED TO BIND THE CUSTOMER) CONSENT TO BE BOUND BY THIS
AGREEMENT. IF YOU DO NOT OR CANNOT AGREE TO THE TERMS CONTAINED HEREIN, THEN (A) DO NOT DOWNLOAD, INSTALL, OR USE THE
SOFTWARE, AND (B) YOU MAY CONTACT JUNIPER NETWORKS REGARDING LICENSE TERMS.

1.

The Parties. The parties to this Agreement are Juniper Networks, Inc. and its subsidiaries (collectively "Juniper"), and the person or organization that

originally purchased from Juniper or an authorized Juniper reseller the applicable license(s) for use of the Software ("Customer") (collectively, the "Parties").

2.

The Software. In this Agreement, "Software" means the program modules and features of the Juniper or Juniper-supplied software, and updates and

releases of such software, for which Customer has paid the applicable license or support fees to Juniper or an authorized Juniper reseller.

3.

License Grant. Subject to payment of the applicable fees and the limitations and restrictions set forth herein, Juniper grants to Customer a

non-exclusive and non-transferable license, without right to sublicense, to use the Software, in executable form only, subject to the following use restrictions:

a.

Customer shall use the Software solely as embedded in, and for execution on, Juniper equipment originally purchased by Customer from

Juniper or an authorized Juniper reseller, unless the applicable Juniper documentation expressly permits installation on non-Juniper equipment.

b.

Customer shall use the Software on a single hardware chassis having a single processing unit, or as many chassis or processing

units for which Customer has paid the applicable license fees.

c.

Other Juniper documentation for the Software (such as product purchase documents, documents accompanying the product, the

Software user manual(s), Juniper’s website for the Software, or messages displayed by the Software) may specify limits to Customer’s use of the
Software. Such limits may restrict use to a maximum number of seats, concurrent users, sessions, subscribers, nodes, or transactions, or
require the purchase of separate licenses to use particular features, functionalities, or capabilities, or provide temporal or geographical limits.
Customer’s use of the Software shall be subject to all such limitations and purchase of all applicable licenses.

The foregoing license is not transferable or assignable by Customer. No license is granted herein to any user who did not originally purchase
the applicable license(s) for the Software from Juniper or an authorized Juniper reseller.

4.

Use Prohibitions. Notwithstanding the foregoing, the license provided herein does not permit the Customer to, and Customer agrees not to and shall

not: (a) modify, unbundle, reverse engineer, or create derivative works based on the Software; (b) make unauthorized copies of the Software (except as
necessary for backup purposes); (c) rent, transfer, or grant any rights in and to any copy of the Software, in any form, to any third party; (d) remove any
proprietary notices, labels, or marks on or in any copy of the Software; (e) distribute any copy of the Software to any third party, including as may be
embedded in Juniper equipment sold in the secondhand market; (f) use any ’locked’ or key-restricted feature, function, or capability without first purchasing
the applicable license(s) and obtaining a valid key from Juniper, even if such feature, function, or capability is enabled without a key; (g) distribute any key
for the Software provided by Juniper to any third party; (h) use the Software in any manner that extends or is broader than the uses purchased by Customer
from Juniper or an authorized Juniper reseller; (i) use the Software on non-Juniper equipment where the Juniper documentation does not expressly permit
installation on non-Juniper equipment; (j) use the Software (or make it available for use) on Juniper equipment that the Customer did not originally purchase
from Juniper or an authorized Juniper reseller; or (k) use the Software in any manner other than as expressly provided herein.

5.

Audit. Customer shall maintain accurate records as necessary to verify compliance with this Agreement. Upon request by Juniper, Customer shall

furnish such records to Juniper and certify its compliance with this Agreement.

6.

Confidentiality. The Parties agree that aspects of the Software and associated documentation are the confidential property of Juniper. As such,

Customer shall exercise all reasonable commercial efforts to maintain the Software and associated documentation in confidence, which at a minimum
includes restricting access to the Software to Customer employees and contractors having a need to use the Software.

7.

Ownership. Juniper and Juniper’s licensors, respectively, retain ownership of all right, title, and interest (including copyright) in and to the Software,

associated documentation, and all copies of the Software. Nothing in this Agreement constitutes a transfer or conveyance of any right, title, or interest in
the Software or associated documentation, or a sale of the Software, associated documentation, or copies of the Software.

8.

Warranty, Limitation of Liability, Disclaimer of Warranty. If the Software is distributed on physical media (such as CD), Juniper warrants for 90 days

from delivery that the media on which the Software is delivered will be free of defects in material and workmanship under normal use. This limited
warranty extends only to the Customer. Except as may be expressly provided in separate documentation from Juniper, no other warranties apply to
the Software, and the Software is otherwise provided AS IS. Customer assumes all risks arising from use of the Software. Customer’s sole remedy and
Juniper’s entire liability under this limited warranty is that Juniper, at its option, will repair or replace the media containing the Software, or provide a
refund, provided that Customer makes a proper warranty claim to Juniper, in writing, within the warranty period. Nothing in this Agreement shall give rise
to any obligation to support the Software. Any such support shall be governed by a separate, written agreement. To the maximum extent permitted by law,
Juniper shall not be liable for any liability for lost profits, loss of data or costs or procurement of substitute goods or services, or for any special, indirect, or
consequential damages arising out of this Agreement, the Software, or any Juniper or Juniper-supplied software. In no event shall Juniper be liable for
damages arising from unauthorized or improper use of any Juniper or Juniper-supplied software.

EXCEPT AS EXPRESSLY PROVIDED HEREIN OR IN SEPARATE DOCUMENTATION PROVIDED FROM JUNIPER AND TO THE EXTENT PERMITTED BY
LAW, JUNIPER DISCLAIMS ANY AND ALL WARRANTIES IN AND TO THE SOFTWARE (WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE),
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT. IN NO EVENT DOES

iii

Содержание Internet Router M160

























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Internet Router M160

D-Link DSL-2750U Quick Start Manual preview
DSL-2750U
Бренд: D-Link Страницы: 2
Cabletron Systems MMAC-5FNB Overview And Setup Manual preview
MMAC-5FNB
Бренд: Cabletron Systems Страницы: 21
Ubee DVW3201B User Manual preview
DVW3201B
Бренд: Ubee Страницы: 9
Riverbed SteelCentral NetExpress Installation Manual preview
SteelCentral NetExpress
Бренд: Riverbed Страницы: 38
SAB SABVISION NVR32 Quick Start Manual preview
SABVISION NVR32
Бренд: SAB Страницы: 29
B&B Electronics Elinx ESW200 Series Quick Start Manual preview
Elinx ESW200 Series
Бренд: B&B Electronics Страницы: 20
Korenix JetNet 3508-LVDC User Manual preview
JetNet 3508-LVDC
Бренд: Korenix Страницы: 16
Mellanox Technologies ConnectX-3 Pro MCX349A-XCCN User Manual preview
ConnectX-3 Pro MCX349A-XCCN
Бренд: Mellanox Technologies Страницы: 35
Patton 13243D4-001 User Manual preview
13243D4-001
Бренд: Patton Страницы: 62
Zoom Realtek Series User Manual preview
Realtek Series
Бренд: Zoom Страницы: 31
Paradyne FrameSaver DSL 9788 Router Installation Instructions Manual preview
FrameSaver DSL 9788 Router
Бренд: Paradyne Страницы: 28
Paradyne 8310 MVLt User Manual preview
8310 MVLt
Бренд: Paradyne Страницы: 108
Pullnet AGENT-2 S41D Line User Manual preview
AGENT-2 S41D Line
Бренд: Pullnet Страницы: 89
Avaya X330W-2USP Quick Start Manual preview
X330W-2USP
Бренд: Avaya Страницы: 16
Paradyne SMD2000-24E Installation Instructions Manual preview
SMD2000-24E
Бренд: Paradyne Страницы: 28
Nortel Passport 8608GTE Specifications preview
Passport 8608GTE
Бренд: Nortel Страницы: 10
mikroElektronika mikroETH 100 Manual preview
mikroETH 100
Бренд: mikroElektronika Страницы: 6
Allied Telesis 613-50550-00 Installation Manual preview
613-50550-00
Бренд: Allied Telesis Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды