manualshive.com logo in svg

Juniper Internet Router M160, Руководство по оборудованию

Juniper Internet Router M160 - эффективное решение для вашей сети. Получите подробное руководство по обслуживанию и настройке оборудования в "Hardware Manual" бесплатно. Скачайте его на manualshive.com уже сегодня, чтобы убедиться в безупречной работе вашего маршрутизатора.

Поделиться
Скачать
background image

This product includes the Envoy SNMP Engine, developed by Epilogue Technology, an Integrated Systems Company. Copyright
© 1986-1997, Epilogue Technology Corporation. All rights reserved. This program and its documentation were developed
at private expense, and no part of them is in the public domain.

This product includes memory allocation software developed by Mark Moraes, copyright © 1988, 1989, 1993, University of Toronto.

This product includes FreeBSD software developed by the University of California, Berkeley, and its contributors. All of the documentation and
software included in the 4.4BSD and 4.4BSD-Lite Releases is copyrighted by the Regents of the University of California. Copyright © 1979, 1980,
1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994. The Regents of the University of California. All rights reserved.

GateD software copyright © 1995, the Regents of the University. All rights reserved. Gate Daemon was originated and developed through release
3.0 by Cornell University and its collaborators. Gated is based on Kirton’s EGP, UC Berkeley’s routing daemon (routed), and DCN’s HELLO routing
protocol. Development of Gated has been supported in part by the National Science Foundation. Portions of the GateD software copyright © 1988,
Regents of the University of California. All rights reserved. Portions of the GateD software copyright © 1991, D. L. S. Associates.

This product includes software developed by Maker Communications, Inc., Copyright © 1996, 1997, Maker Communications, Inc.

Juniper Networks, the Juniper Networks logo, NetScreen, NetScreen Technologies, the NetScreen logo, NetScreen-Global Pro, ScreenOS, and
GigaScreen are registered trademarks of Juniper Networks, Inc. in the United States and other countries.

The following are trademarks of Juniper Networks, Inc.: ERX, ESP, E-series, Instant Virtual Extranet, Internet Processor, J2300, J4300, J6300, J-Protect,
J-series, J-Web, JUNOS, JUNOScope, JUNOScript, JUNOSe, M5, M7i, M10, M10i, M20, M40, M40e, M160, M320, M-series, MMD, NetScreen-5GT,
NetScreen-5XP, NetScreen-5XT, NetScreen-25, NetScreen-50, NetScreen-204, NetScreen-208, NetScreen-500, NetScreen-5200, NetScreen-5400,
NetScreen-IDP 10, NetScreen-IDP 100, NetScreen-IDP 500, NetScreen-Remote Security Client, NetScreen-Remote VPN Client, NetScreen-SA 1000 Series,
NetScreen-SA 3000 Series, NetScreen-SA 5000 Series, NetScreen-SA Central Manager, NetScreen Secure Access, NetScreen-SM 3000, NetScreen-Security
Manager, NMC-RX, SDX, Stateful Signature, T320, T640, T-series, and TX Matrix. All other trademarks, service marks, registered trademarks, or
registered service marks are the property of their respective owners. All specifications are subject to change without notice.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to
change, modify, transfer, or otherwise revise this publication without notice.

Copyright © 2005, Juniper Networks, Inc. All rights reserved.

M160 Internet Router Hardware Guide

Copyright © 2005, Juniper Networks, Inc.
All rights reserved. Printed in USA.

Writing: Sheila Nolte, Tony Mauro, Jerry Isaac
Editing: Stella Hackell
Illustration: Faith Bradford
Cover Design: Edmonds Design

Revision History
25 February 2005—530-007250-01 Revision 5. Correct DC power illustration and replacement procedure.
12 November 2004—530-007250-01 Revision 4. Revised fuse replacement procedure.
30 June 2003—530-007250-01 Revision 3. Corrected and added component information.
15 October 2002—530-007250-01 Revision 2. Incorporated updated technical information; synchronized with M40e Internet Router Hardware Guide.
15 March 2002—530-007250-01 Revision 1. Incorporated updated technical information.
15 October 2001—Incorporated updated technical information.
15 May 2001—Adopted new template.
28 February 2001—Incorporated updated technical information.
31 August 2000—Incorporated updated technical information.
31 March 2000—First edition.

The information in this document is current as of the date listed in the revision history.

Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer or
otherwise revise this publication without notice.

Products made or sold by Juniper Networks (including the ERX-310, ERX-705, ERX-710, ERX-1410, ERX-1440, M5, M7i, M10, M10i, M20, M40, M40e,
M160, M320, and T320 routers, T640 routing node, and the JUNOS and SDX-300 software) or components thereof might be covered by one or more of the
following patents that are owned by or licensed to Juniper Networks: U.S. Patent Nos. 5,473,599, 5,905,725, 5,909,440, 6,192,051, 6,333,650, 6,359,479,
6,406,312, 6,429,706, 6,459,579, 6,493,347, 6,538,518, 6,538,899, 6,552,918, 6,567,902, 6,578,186, and 6,590,785.

YEAR 2000 NOTICE

Juniper Networks hardware and software products are Year 2000 compliant. The JUNOS software has no known time-related limitations through the year
2038. However, the NTP application is known to have some difficulty in the year 2036.

ii

Содержание Internet Router M160

























































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Internet Router M160

D-Link DSL-500 Command Reference Manual preview
DSL-500
Бренд: D-Link Страницы: 15
D-Link DSN-4100 Series Quick Start Manual preview
DSN-4100 Series
Бренд: D-Link Страницы: 2
D-Link DWL-G550 Product Data Sheet preview
DWL-G550
Бренд: D-Link Страницы: 2
Makita RF1101 Parts Breakdown preview
RF1101
Бренд: Makita Страницы: 2
DPtech LSW3003 Series Manual preview
LSW3003 Series
Бренд: DPtech Страницы: 39
KPN MIK820 Quick Start Manual preview
MIK820
Бренд: KPN Страницы: 14
Internet Security Systems Proventia A1204 User Manual preview
Proventia A1204
Бренд: Internet Security Systems Страницы: 42
Solwise WLn-401 Quick Installation Manual preview
WLn-401
Бренд: Solwise Страницы: 7
QTech QSW-2900 User Manual preview
QSW-2900
Бренд: QTech Страницы: 406
Razer RZ37-0251 Manual preview
RZ37-0251
Бренд: Razer Страницы: 17
Topcom Xplorer 871B (Norwegian) Hurtig Installasjonsveiledning preview
Xplorer 871B
Бренд: Topcom Страницы: 16
Abocom 802.11a/b/g SDIO WiFi Module SDM3100 User Manual preview
802.11a/b/g SDIO WiFi Module SDM3100
Бренд: Abocom Страницы: 14
ADTRAN 1202052L1 User Manual preview
1202052L1
Бренд: ADTRAN Страницы: 136
Baileigh 1019072 Operator'S Manual preview
1019072
Бренд: Baileigh Страницы: 20
Intercel eSAM AK-SM 800 User Manual preview
eSAM AK-SM 800
Бренд: Intercel Страницы: 17
NETGEAR WGR614DLNA Datasheet preview
WGR614DLNA
Бренд: NETGEAR Страницы: 2
NetComm 3G15Wn Manual preview
3G15Wn
Бренд: NetComm Страницы: 2
Westermo MRD-455 Application Note preview
MRD-455
Бренд: Westermo Страницы: 13

Бренды по названию

Популярные бренды

Загрузить еще бренды