INVT GD20-0R4G-2-UL, Руководство по эксплуатации

Страница: 139 / 160

Goodrive20-UL Series VFD Communication protocol
-134-
Function Address Data description
R/W
characteristics
The address of
communication setting
2001H
Communication-based frequency
setting (0
–Fmax (unit: 0.01Hz))
R/W
2002H
PID reference, range (0
–1000,
1000 corresponds to100.0%)
Set P00.01 to 2 and P00.06 to 8.
The command sent to the VFD:
VFD
address
Continuous
writing
command
Parameters
address
CRC check
Byte
number
Forward
running
10Hz
Data
number
If the response message is as below:
Continuous
writing
command
VFD
address
Parameters
address
CRC check
Data
number
Example 2: set the ACC time of 01H VFD as 10s and the DEC time as 20s.
P00.11 ACC time 1
ACC time means the time needed if the VFD
speeds up from 0Hz to the Max. One (P00.03).
DEC time means the time needed if the VFD
speeds down from the Max. Output frequency to
0Hz (P00.03).
Goodrive300 series VFDs define four groups of
ACC/DEC time which can be selected by P05.
The factory default ACC/DEC time of the VFD is
the first group.
Setting range of P00.11 and P00.12: 0.0
–3600.0s
Depend
on
model
○
P00.12 DEC time 1
Depend
on
model
○
The corresponding address of P00.11 is 000B, the ACC time of 10s corresponds to 0064H,
and the DEC time of 20s corresponds to 00C8H.
The command sent to the VFD:
Continuous
writing
command
VFD
address
Parameters
address
CRC check
Byte
number
10s 20s Data
number
If the response message is as below:
Note : The space between above commands is for instruction and there is no space between
the commands during actual applications.