INVT GD20-0R4G-2-UL, Руководство по эксплуатации

Страница: 142 / 160

Goodrive20-UL Series VFD Technical data
-137-
A.2 Marking
A.2.1 CE marking
The CE mark is attached to the VFD to verify that the VFD follows the provisions of the
European Low Voltage (2014/35/EU) and EMC Directives (2014/30/EU).
A.2.2 UL and CUL marking
The UL and CUL marks are attached to the VFD to verify that the VFD follows the provisions of
the UL508C and C22.2 No. 274-13.
A.2.3 Compliance with the European EMC Directive
The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800-3) covers
requirements stated for VFDs. See section A.3 "EMC regulations".
A.3 EMC regulations
The EMC product standard (EN 61800-3) describes the EMC requirements to the VFD.
First environment: domestic environment (includes establishments connected to a low-voltage
network which supplies buildings used for domestic purposes).
Second environment includes establishments connected to a network not directly supplying
domestic premises.
Four categories of the VFD:
VFD of category C1: VFD of rated voltage less than 1000 V and used in the first environment.
VFD of category C2: VFD of rated voltage less than 1000 V other than pins, sockets and
motion devices and intended to be installed and commissioned only by a professional
electrician when used in the first environment.
Note: IEC/EN 61800-3 in EMC standard doesn't limit the power distribution of the VFD, but it
defines the upstage, installation and commission. The professional electrician has necessary
skills in installing and/or commissioning power drive systems, including their EMC aspects.
VFD of category C3: VFD of rated voltage less than 1000 V and used in the second
environment other than the first one
VFD of category C4: VFD of rated voltage more than 1000 V or the nominal current is above or
equal to 400A and used in the complicated system in second environment.
A.3.1 VFDs of category C2
The induction disturbance limit meets the following stipulations:
1. Select an optional EMC filter according to Appendix C "Optional peripheral accessories"
and install it following the description in the EMC filter manual.